Session_1_Theory of CAE
Session_2_Theory of FEA/FEM
Session_3_1D Elements Theory
Session_4_Rod Problem - Tension
Session_5_Bar Problem - Compression
Session_6_Beam Problem 1 - Bending
Session_7_Beam Problem 2 - Bending (Case 1 and Case 2)
Session_8_Beam Problem - Fix Fix
Session_9_Beam Problem - Simply Supported
Session_10_Nodes, Node Edit, Temp Nodes, Distance, Line, Line Edit Panels
Session_11_Free-Free Run - Theory
Session_12_Free Free Run - Problem Statement
Session_13_2D Meshing - Theory
Session_14_2D Geometry Editing - Importing and Repairing CAD
Session_15_2D Geometry Editing - Generating a Midsurface
Session_16_2D Geometry Editing - Simplifying Geometry
Session_17_2D Geometry Editing - Refining Topology
Session_18_2D Geometry Editing - Roll Cage
Session_19_Surface, Surface Edit, Defeauture Panels
Session_20_Plate With Hole - Without Washer
Session_21_Plate With Hole - With Washer
Session_22_Plate With Hole - Biasing
Session_23_2D Meshing - Automesh (Size & Bias)
Session_24_2D Meshing - Automesh (Edge/Surface deviation etc.)
Session_25_2D Meshing - Automesh (QI Optimize)
Session_26_2D Meshing - Ruled, Spline, Skin etc.
Session_27_3D Meshing - Theory
Session_28_3D Geometry Editing
Session_29_Solid & Solid Edit Panels
Session_30_3D Meshing - Tetrameshing
Session_31_3D Meshing - Hex-Penta Mesh using Surfaces
Session_32_3D Meshing - Hexahedral Mesh using the Solid Map
Session_33_Linear Static Analysis - Theory
Session_34_Linear Static Analysis - Problem Statement 1
Session_35_Linear Static Analysis - Problem Statement 2
Session_36_Thermal Stress Analysis - Theory
Session_37_Thermal Stress Analysis - Problem Statement
Session_38_Thermal Stress Analysis with Anisotropic Material - Problem Statement
Session_39_Linear Steady State Heat Transfer Analysis - Theory
Session_40_Linear Steady State Heat Transfer Analysis - Problem Statement
Session_41_Coupled Linear Heat Transfer Analysis - Theory
Session_42_Coupled Linear Heat Transfer Analysis - Problem Statement
Session_43_Linear Transient Heat Transfer Analysis - Theory
Session_44_Linear Transient Heat Transfer Analysis - Problem Statement
Session_45_Inertia Relief - Theory
Session_46_Inertia Relief - Problem Statement
Session_47_Eigenvalue Buckling Analysis - Theory
Session_48_Eigenvalue Buckling Analysis - Problem Statement
Session_49_CWELD Elements - Problem Statement
Session_50_Axi-Symmetry - Theory
Session_51_Analysis of an Axi-symmetric Structure - Problem Statement
Session_52_Composites - Theory
Session_53_Composites - Problem Statement
Session_54_Linear and Nonlinear Gap Analysis - Problem Statement
Session_55_Normal Modes Analysis - Theory
Session_56_Normal Modes Analysis - Problem Statement
Session_57_Frequency Response Analysis (Direct & Modal) - Theory
Session_58_Direct Frequency Response Analysis - Problem Statement
Session_59_Modal Frequency Response Analysis - Problem Statement
Session_60_Computation of Equivalent Radiant Power - Theory
Session_61_Computation of Equivalent Radiant Power - Problem Statement
Session_62_Transient Response Analysis (Direct & Modal) - Theory
Session_63_Transient Response Analysis (Direct) - Problem Statement
Session_64_Transient Response Analysis (Modal) - Problem Statement
Session_65_Random Response Analysis - Theory
Session_66_Random Response Analysis of a Flat Plate - Problem Statement
Session_67_Response Spectrum Analysis - Theory
Session_68_Response Spectrum Analysis of a Structure - Problem Statement
Session_69_Complex Eigenvalue Analysis - Theory
Session_70_Complex Eigenvalue Analysis - Problem Statement
Session_71_Fatigue Analysis - Theory
Session_72_Fatigue using S-N (Stress - Life) Method - Problem Statement
Session_73_Fatigue using E-N (Strain - Life) Method - Problem Statement
Session_74_Fatigue Process Manager (FPM) using S-N (Stress - Life) Method - Problem Statement
Session_75_Fatigue Process Manager (FPM) using E-N (Strain - Life) Method - Problem Statement
Session_76_Non Linear Quasi Static (NLSTAT) Analysis - Theory
Session_77_NLSTAT Analysis of Solid Blocks in Contact - Problem Statement
Session_78_NLSTAT Analysis of Gasket Materials in Contact - Problem Statement
Session_79_1D and 3D Pretensioned Bolt Analysis - Theory
Session_80_1D and 3D Pretensioned Bolt Analysis - Problem Statement