Basic Course Contest
1. Introduction to CAD
a. What is Computer Aided Design
b. CAD Process Flow
c. Where CAD is used
d. Design Terminologies
e. CREO Parametric General Overview
f. Difference Between CAD, CAM and CAE.
2. Sketching Mode
a. Sketching Tools – Line, Rectangle, Circle, Arc, Ellipse, Spline, Fillet, Chamfer, Text, Offset, Centreline, Point, Coordinate System.
b. Construction Mode
c. Dimensions
d. Editing Tools – Modify, Mirror, Divide, Delete Segment, Corner.
e. Constrain Tools – Vertical, Horizontal, Perpendicular, Tangent, Mid-point, Coincident, Symmetry, Equal, Parallel.
Creating Roll Cage Structures.
3. 3D Solid Modelling of Simple Component
a. Solid Modelling Tools – Extrude, Round, Chamfer, Revolve.
6 Classwork models and 25 Homework models.4. Assembly of Simple Component
a. Creating Assembly
1 Classwork model and 5 Homework models.Professional Course Contest
5. 1D Line Modelling
a. Datum – Centreline, Point, Coordinate System.
b. Create a Plain – By Plain, By Plain, By Plain and Point, By Two Lines, By Three points.
c. Setup – Reference
d. Editing Tools – Mirror & Trim.
6. 2D Surface Modelling
a. Creating Surface from Part Modelling – Sweep, Merge, Boundary Blend.
b. Creating Surface from Sheetmetal – Sketching, Planer, Flange, Flat, Blend, Extrude.
7. 3D Solid Modelling
a. Sketching.
b. Extrude.
c. Engineering – Draft, Shell, Rib.
d. Datum – Axis, Point.
e. Shape Tools – Revolve, Sweep, Helical Sweep, Sweep blend.
f. Pattern.
g. Wrap.
8. Assembly
a. Constrain – Distance, Angle offset, Parallel, Coincident, Normal, Coplanar, Centred, Tangent, Fix.
b. Joints – Pin, Slider, Cylinder.
9. Assembly Mechanism
4 Classwork models and 20 Homework models.10. Rendering
a. Colour & View.
1 Classwork model and 5 Homework models.11. Drawing and Drafting
a. 2D Drafting.
b. Section View Drawing.